This is a custom tribal air brush on a Glenn Minami short board.
Custom Air Brush
April 15th, 2012
Lots of Lumber
April 12th, 2012
This is a custom surfboard by Kimo Greene with some serious lumber. This custom blank has Balsa rails and stringer with Cedar t-bands.
STOCK SURFBOARDS by Ben Aipa, Akila Aipa, Dick Brewer, Jeff Bushman, Bat Surfboards, Mike Casey, Cino, Jay Hodge, Keoki, Kekoa Uemura, Makani, Glenn Minami, Dennis Pang, Mitsu, Mike Tuten, Jon Pyzel, Slick, Tommy Tanaka, Rawson, Country ...
Continue Reading →Dick Brewer Hand Shaped Single Fin
April 5th, 2012
This is a Dick Brewer hand shaped single fin with a 1″ Red Wood stringer and a Red Wood tail block. This 9’6 is 23 1/4 wide and 3 1/8 thick.
Dick Brewer Single Fin
April 4th, 2012
This is the tail of a custom Dick Brewer hand shape. This board has a lot of lumber with a 1″ Red Wood stringer and tail block. The fin is a template designed by Brewer and made at Island Fin Design on the North Shore.
Mike Tuten SUP
April 1st, 2012
This is a custom stand up paddle board shaped by Mike Tuten from 1.7llb EPS. The bottom is a brown foam stain. The deck is a product called Chromaveil which is a 2oz fiberglass cloth with sublimated images. Wood grains are just some of the images you can get. This board is a beast at 12’0 x 33 x 5.
Calico Jack Board
March 15th, 2012
This was a custom Chronic board with an all black air brush and the Calico Jack symbol. An all black board is not practical for the warm climates. Fortunately, this was for a customer in Nova Scotia.
Custom Boards for Disney
March 8th, 2012
This is one of ten indentical long boards made for a Disney movie being filmed in Puerto Rico. All the board were air brushed to make it look like they were made from wood. We are not sure of the name of the movie or the release but we will be looking for our boards.
Zombie Board
March 4th, 2012
Some customers prefer to do their own art work on their boards. This is fine as long as we know ahead of time we will not finish the board with any polishing compound. This will leave the surface oil free and ready to paint. Most customers use Pasca Pens or spary paint. This board was painted with oil paints. All the artwork should get a clear coat ...
Brewer Single Fin with T-Band Stringer
March 1st, 2012
This is a hand shaped Dick Brewer single fin with a t-band stringer. Most of the Brewer’s customers pay extra for custom stringers. We can get any stringer configuration you can dream up. The bottom is a red tint lamination and yellow black foam stain deck. A black pin line seperates the color and the gloss ...
Chronic Long Board for Straub Hospital
February 28th, 2012
This is a custom long board shaped by Chronic for Straub Hospital. The logos on the bottom are all of the partner Hospitals. This logo was printed on rice paper and laminated into the board. We can print logos up to 39″ wide. This print was 20″ wide. The colors are not as opaque as ...