This board has been taped off and is ready to a color lamination bottom. After the bottom is on it will have to be trimmed before it is complete hard.
Continue Reading →Tape Off for Color
November 30th, 2012
Tow Board Season
November 29th, 2012
A lot of tow boards going through lately. This is two Brewer Balsa Tow Boards and one PU from tow foam.
Continue Reading →Heaviest Paddle Wipeout GoPro Survives Attached to 12ft Dick Brewer Gun
November 28th, 2012
Without a doubt this is one of the most sic over-the-falls shots EVER!!! Both the The Brewer and Garrett survived to talk about it!
Continue Reading →Fresh Batch of Chronic Bully Boards
November 9th, 2012
We have fresh batch of Chronic Bully boards getting finished today. This stock batch ranges from 6’6 to 7’4. The board pictured is a 6’10 x 23 x 3 1/8.
Continue Reading →Retro Bolt
November 7th, 2012
This is a retro board with a red tint and a resin bolt. The board has been sanded the bolt added. The next step is the gloss and this board will get polished tomorrow.
Continue Reading →Fabric Inlay
November 5th, 2012
This is a custom nose rider shaped by Slick for Aloha Board Shop. The deck patch is a fabric inlay with a black pin line.
Continue Reading →Fabric Inlay
November 4th, 2012
This is a closer look at the fabric inlay on this custom nose rider by Slick. We used to do a lot of fabric inlays in the late 90’s and early 2000’s.
Continue Reading →Wild Foam Stain
November 2nd, 2012
This is not an air brush. Otis just pulled off this design with foam stain. This is a custom double stringer blank shaped by Mike Casey.
Continue Reading →Chronic Hybrid Roach
November 1st, 2012
This is a Chronic Hybrid Roach with all the bells and whistles. The tail is a double wing swallow. The deck has rail channels and the bottom has beveled rails. It is hot coated and ready to get sanded and shipped to Malaysia.
Continue Reading →