This board has been taped off and is ready to a color lamination bottom.  After the bottom is on it will have to be trimmed before it is complete hard.

A lot of tow boards going through lately.  This is two Brewer Balsa Tow Boards and one  PU from tow foam.

We have fresh batch of Chronic Bully boards getting finished today.  This stock batch ranges from 6’6 to 7’4.  The board pictured is a 6’10 x 23 x 3 1/8.

This is a retro board with a red tint and a resin bolt.  The board has been sanded the bolt added.  The next step is the gloss and this board will get polished tomorrow.

This is a custom nose rider shaped by Slick for Aloha Board Shop.  The deck patch is a fabric inlay with a black pin line.

This is a closer look at the fabric inlay on this custom nose rider by Slick.  We used to do a lot of fabric inlays in the late 90’s and early 2000’s.

This is a Chronic Hybrid Roach with all the bells and whistles.  The tail is a double wing swallow.  The deck has rail channels and the bottom has beveled rails.  It is hot coated and ready to get sanded and shipped to Malaysia.

This is a custom 12’6 stand up paddle board hand shaped by Kevin Sneid from Everpaddle.  This flat water rocket is 12’6 x 29 x 5 1/2.  It has carbon rails and a foam stain deck.  This board is ready to sand but I am sure the…

This is a Chronic Bully model with foam stain bands.  The foam stain was done with yellow bands first then red was dragged across the yellow with a 4″ brush.  The pin lines are free hand with a smaller brush.  We have been getting a…