February 12th, 2007
This is a custom surfboard we built the US Army. They will be giving it away at a recruiting drive. It is a yellow tint, black pin line and custom logo with a gloss polish finish.
Take a look at our stock surfboard inventory. If you cannot find what you want in our stock surfboard inventory then place an order for ...
Continue Reading →January 15th, 2007
This is Ben Aipa’s thruster template made for FCS Plugs.
January 11th, 2007
This was a classic Hawaiian surfboard company.
These types of surfboards can be found in our stock surfboard inventory. If you cannot find the surfboard you want, order a custom surfboard on our custom order surfboard page.
Continue Reading →January 9th, 2007
This is a custom Brewer wood board with a Koa veneer wood fin.
December 13th, 2006
Dick Brewer is hard at work finishing a big batch of Balsa boards and starting on his foam boards.
These types of surfboards can be found in our stock surfboard inventory. If you cannot find the surfboard you want, order a custom surfboard on our custom order surfboard page.
Continue Reading →November 5th, 2006
This is a 1972 Ben Aipa Sting. This board has a yellow tint lamination and a blue resin pin line. The Sting works well at pulling in the tail and keeping the foam under your chest while you are paddling.
November 4th, 2006
This is the deck of a 1972 Ben Aipa Sting with yellow tint lamination and double blue resin pin lines. This is a classic 70’s design that is still popular today.
October 12th, 2006
This is a 8’0 Eric Arakawa gun. A lot of these are going through the factory this time of year.
October 6th, 2006
This is a batch of boards for Andy Irons to surf during the Triple Crown. We get a lot of pro board orders from September through November.
August 20th, 2006
This is a 10’0 Ben Aipa custom long board with a custom air brush by Gavin Hasegawa.
